|2000 Cayuga County New York Lidar|
|These data were collected in April of 2000 for the Cayuga County New York Department of Planning and Economic Development. Elevation points were sampled at densities necessary to support the generation of contours that meet or exceed United States National Map Accuracy Standards applicable to the map scales that County tax maps are published and for the following intervals of contour lines to be depicted: four feet for the entire county, two feet for the City of Auburn and adjacent area and two feet for six floodplain areas. This is a bare earth data set, the points, however, are classified as "Never Classified". There are points returned from water surfaces. Point spacing is approximately 5 m. Also, there are areas in the county where the data have been regularized, i.e. gridded points.|
|Get the Data|
|Access||Format(s)||Distributor(s) / Contact Info||Instructions / Constraints|
- Format version:
(version is unknown)
(organisationName is template)
- Ordering Instructions
- The National Geophysical Data Center serves as the archive for this LIDAR data. NGDC should only be contacted for this data if it cannot be obtained from NOAA Coastal Services Center.
- The National Geophysical Data Center serves as the archive for this LIDAR dataset. NGDC should only be contacted for the data if it cannot be obtained from NOAA Coastal Services Center.