|2001 North Carolina Floodplain Mapping Program (NCFMP) Lidar: Phase 1B (Cape Fear and Lumber River Basins)|
|This airborne LiDAR terrain mapping data was acquired in the spring of 2001. The data were collected for the floodplain mapping program for the state of North Carolina. The data were collected for the state in three phases: 1, 2, and 3. This metadata record describes that data that were in phase 1 of collection and fall within the Cape Fear and Lumber River Basins in central and eastern North Carolina. This area consists of 30 counties which are listed below in the Place Keywords field. The data were received by the NOAA Coastal Services Center from the U.S. Geological Survey (USGS) Center for Lidar Coordination and Knowledge (CLICK). For data storage and Digital Coast provisioning purposes, the CSC converted the data to geographic coordinates and ellipsoid (Geoid99) elevations. The data are unclassified.|
|Get the Data|
|Access||Format(s)||Distributor(s) / Contact Info||Instructions / Constraints|
- Format version:
(version is unknown)
(organisationName is template)
- Ordering Instructions
- The National Geophysical Data Center serves as the archive for this LIDAR data. NGDC should only be contacted for this data if it cannot be obtained from NOAA Coastal Services Center.
- The National Geophysical Data Center serves as the archive for this LIDAR dataset. NGDC should only be contacted for the data if it cannot be obtained from NOAA Coastal Services Center.