| 2005 - 2007 US Army Corps of Engineers (USACE) Topo/Bathy Lidar: Maine, Massachusetts,
and Rhode Island |
| MASSACHUSETTS AND RHODE ISLAND: The U.S. Army Corps of Engineers collects (by themselves
and contractors) and maintains LiDAR data including orthophotos in coastal areas of
the United States and its territories. The Corps acquires this data in the course
of performing its mission of Flood Control, Navigation, Environmental Engineering,
and support for the Army and others. Topographic LIDAR datasets were collected using
a SHOALS-1000T at 500m altitude, spot density of 2m x 1 m and sampling rate 10kHz.
Bathymetric data were collected using a SHOALS-1000T hydrographic laser flying at
400m altitude, spot spacing 5m x 5m and 1kHz sampling rate. MA and RI Data Date of
Collection: Topo 20051111-20051202 Bathy: 20070527-20070601 MAINE: The U.S. Army Corps
of Engineers collects (by themselves and contractors)and maintains LiDAR data including
orthophotos in coastal areas of the United States and its territories. Topographic
LIDAR datasets were collected using a SHOALS-1000T at 500m altitude, spot density
of 2m x 1m and sampling rate of 10 kHz. Topo data were also collected with a Leica
ALS-50 sensor at 1600m altitude spot spacing of 1m x 1m spot spacing, and 133 kHz
sampling rate. Bathymetric data were collected using a SHOALS-1000T hydrographic laser
flying at 400m altitude, spot spacing 5m x 5m and 1kHz sampling rate. ME Data Date
of Collection: Topo 20051019-20070806 Bathy: 20070606-20070611 This data is not a
bare earth dataset.
|
|
