| This dataset is the lidar data for Volusia County, Florida, approximately 1,432 square
miles, acquired in early March of 2006. A total of 143 flight lines of Lidar data
were acquired in eleven sessions between 2-8 March 2006. This dataset is comprised
of 1,591 LiDAR files, based on the Volusia County 5,000’ by 5,000’ sheet index system,
in the LAS file format. The raw data was collected at an average ground sample distance
of 1-meter (3.3 ft), and the bare earth was classified and used as a basis for the
2006 Volusia Countywide Digital Orthophoto Project. Lidar was collected to support
DTM development suitable to generate 1 foot contours that meet 2 foot contour accuracy
specifications. This data is not intended for engineering, design, water modeling,
or any other purposes other than as stated within this document. This data is intended
for orthophoto rectification purposes only. The lidar data classifications in this
data set are: unclassified, ground and high vegetation. NOTE: Please be aware that
there are returns from the water surface that are classified as ground, as well as
unclassified.
|
