National Geophysical Data Center (NGDC), NOAA Satellite and Information Service

View Metadata As: Get Data, FAQ, HTML, 19139 XML
Assess Metadata For: Completeness, DOI Readiness, CSW Readiness, Components

2007 - 2008 Florida Division of Emergency Management (FDEM) Lidar Project: Blocks 1 - 10 (Southeast Florida and Keys)

browse graphicThe data were organized into 10 blocks. The 'block index' shapefile shows the extent of each constituent block for the 2007 FDEM Southeast Florida and Florida Keys lidar data set.
This Light Detection and Ranging (LiDAR) LAS dataset is a topographic survey conducted for the State of Florida Division of Emergency Management LiDAR Project. These data were produced for the Florida Division of Emergency Management. The LiDAR point cloud was flown at a density sufficient to support a maximum final post spacing of 4 feet for unobscured areas. 3001 Inc. acquired the data from July 12, 2007 through February 8, 2008. The data was divided into 5000' by 5000' cells that serve as the final tiling scheme. The State of Florida Division of Emergency Management LiDAR Survey was collected under the guidance of a Professional Mapper/Surveyor.

Cite this dataset when used as a source.

Search and Download
    Distribution Formats
    • LAZ
    Distributor DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
    Point of Contact Florida Division of Emergency Management (FDEM)
    850-413-9969
    Associated Resources
    • Lidar Dataset Supplemental Information
    Originator
    • DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
    Originator
    • Florida Division of Emergency Management (FDEM)
    Publisher
    • DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
    Date(s)
    • publication: 2009-01-01
    Data Presentation Form: Digital image
    Dataset Progress Status Complete
    Data Update Frequency: Not planned
    Purpose: The State of Florida Division of Emergency Management LiDAR Project Survey data will support the creation of Federal Emergency Management Agency Flood Insurance Rate Maps (FEMA FIRM) and an integrated ground and surface water model. The State of Florida Division of Emergency Management LiDAR Survey was collected under the guidance of a Licensed and Professional Surveyor/Mapper.
    Use Limitations
    • These data depict the elevations at the time of the survey and are only accurate for that time. Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations. Any conclusions drawn from analysis of this information are not the responsibility of NOAA or any of its partners. These data are NOT to be used for navigational purposes.
    Time Period: 2007-07-12  to  2008-02-08
    Spatial Reference System: urn:ogc:def:crs:EPSG::4269 Ellipsoid in Meters
    Spatial Bounding Box Coordinates:
    N: 27.565112
    S: 24.537523
    E: -80.021117
    W: -81.817534
    Spatial Coverage Map:
    Themes
    • Bathymetry/Topography
    • Contour
    • DEM
    • DSM
    • DTM
    • Elevation
    • Height
    • Photogrammetry
    • Planimetric
    • TIN
    • Stereo Photogrammetry
    • LAS V.1.1 LiDAR
    Places
    • US
    • Florida
    • St. Lucie County
    • Martin County
    • Palm Beach County
    • Broward County
    • Miami-Dade County
    • Monroe County
    • Florida Keys
    • Miami
    • Key West
    Use Constraints No constraint information available
    Fees Fee information not available.
    Lineage Statement Lineage statement not available.
    Processor
    • 3001 Inc.
    • 3001 Inc.
    • DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
    • DOC/NOAA/NESDIS/NGDC > National Geophysical Data Center, NESDIS, NOAA, U.S. Department of Commerce
    Processing Steps
    • The Airborne Global Position System (ABGPS), inertial measurement unit (IMU), and raw scans are collected during the LiDAR aerial survey. The ABGPS monitors the xyz position of the sensor and the IMU monitors the orientation of the aircraft. During the aerial survey laser pulses reflected from features on the surface and are detected by the receiver optics and collected by the data logger. GPS locations are based on data collected by receivers on the aircraft and base stations on the ground. The ground base stations are placed no more than 20 km radius from the flight survey area.
    • The ABGPS, IMU, and raw scans are integrated using proprietary software developed by the Leica Geosystems and delivered with the Leica ALS50 System. The resultant file is in a LAS binary file format. The LAS file version 1.1 format can be easily transferred from one file format to another. It is a binary file format that maintains information specific to the LiDAR data (return#, intensity value, xyz, etc.). The resultant points are produced in the Florida State Plane East Zone coordinate system, with units in feet and referenced to the NAD83/90 HARN horizontal datum and NAVD88 vertical datum.
    • The unedited data are classified to facilitate the application of the appropriate feature extraction filters. A combination of proprietary filters is applied as appropriate for the production of bare-earth digital terrain models (DTMs). Interactive editing methods are applied to those areas where it is inappropriate or impossible to use the feature extraction filters, based upon the design criteria and/or limitations of the relevant filters. These same feature extraction filters are used to produce elevation height surfaces.
    • Filtered and edited data are subjected to rigorous QA/QC according to the 3001 Inc. Quality Control Plan and procedures. Very briefly, a series of quantitative and visual procedures are employed to validate the accuracy and consistency of the filtered and edited data. Ground control is established by 3001, Inc. and GPS-derived ground control points (GCPs) points in various areas of dominant and prescribed land cover. These points are coded according to landcover, surface material and ground control suitability. A suitable number of points are selected for calculation of a statistically significant accuracy assessment as per the requirements of the National Standard for Spatial Data Accuracy. A spatial proximity analysis is used to select edited LiDAR data points within a specified distance of the relevant GCPs. A search radius decision rule is applied with consideration of terrain complexity, cumulative error and adequate sample size. Accuracy validation and evaluation is accomplished using proprietary software to apply relevant statistical routines for calculation of Root Mean Square Error (RMSE) and the National Standard for Spatial Data Accuracy (NSSDA) according to Federal Geographic Data Committee (FGDC) specifications.
    • The LiDAR mass points were delivered in American Society for Photogrammetry and Remote Sensing LAS 1.1 format. The header file for each dataset is complete as define by the LAS 1.1 specification. In addition the following fields are included: Flight Date Julian, Year, and Class. The data were classified as follows: Class 1 = Unclassified- this class includes vegetation, buildings, noise etc.; Class 2 = Ground; Class 7 = Noise; Class 9 = Water; Class 12 = Overlap. The datasets were delivered in the 5000' by 5000' tiling scheme. The tiles are suitable for seamless topographic data mosaics that include no "no data" areas. The names of the tiles are left padded with zeros as required to achieve a six character length and all files utilize the LAS file extension.
    • The NOAA Coastal Services Center (CSC) received files in LAS format. The files contained LiDAR intensity and elevation measurements. CSC performed the following processing on the data to make it available within Digital Coast: 1. The data were converted from State Plane Florida West coordinates to geographic coordinates. 2. The data were converted from NAVD88 heights to ellipsoid heights using Geoid03. 3. The LAS header fields were sorted by latitude and updated.
    • The NOAA National Geophysical Data Center (NGDC) received lidar data files via ftp transfer from the NOAA Coastal Services Center. The data are currently being served via NOAA CSC Digital Coast at http://www.csc.noaa.gov/digitalcoast/. The data can be used to re-populate the system. The data are archived in LAS or LAZ format. The LAS format is an industry standard for LiDAR data developed by the American Society of Photogrammetry and Remote Sensing (ASPRS); LAZ is a loseless compressed version of LAS developed by Martin Isenburg (http://www.laszip.org/). The data are exclusively in geographic coordinates (either NAD83 or ITRF94). The data are referenced vertically to the ellipsoid (either GRS80 or ITRF94), allowing for the ability to apply the most up to date geoid model when transforming to orthometric heights.

    Metadata Last Modified: 2013-06-07

    For questions about the information on this page, please email: mike.sutherland@noaa.gov