| 2007 Oregon Parks and Recreation Department Silver Falls State Park Lidar |
| The dataset represents the Lidar elevations for Silver Falls State Park in Marion
County, Oregon. The LiDAR data was collected during March 2007. This was a leaf-off
condition. The lidar data are multiple return and bare earth classified. An Optech
3100 LiDAR system was mounted in a fixed-wing aircraft and flown 900 meters above
ground level (AGL). A pulse repetition frequency (PRF) of 71 kHz with at least 100%
overlap (minimum 50% side-lap) was used. Greater than 8 points per square meter and
near nadir scan angles were used to increase penetration of vegetation to ground surfaces.
Ground level GPS and aircraft IMU were collected during the flight. In some areas
of heavy vegetation or forest cover, there may be relatively few ground points in
the LiDAR data. Elevation values for open water surfaces are not valid elevation values
because few LiDAR points are returned from water surfaces. Watershed Sciences, Inc.
collected the LiDAR and created this data set for Oregon Parks and Recreation.
|
|
