2009 US Army Corps of Engineers (USACE) Joint Airborne Lidar Bathymetry Technical Center of Expertise (JALBTCX) Topobathy Lidar: Isle Royale, Michigan
This kmz file shows the extent of coverage for the 2009 USACE Isle Royale lidar data set.
These files contain topographic and bathymetric lidar data collected by the Compact Hydrographic Airborne Rapid Total Survey (CHARTS) system along the coastline of the island of Isle Royale, Michigan in Lake Superior. CHARTS integrates topographic and bathymetric lidar sensors, a digital camera and a hyperspectral scanner on a single remote sensing platform for use in coastal mapping and charting activities. Data coverage generally extends along the coastline from the waterline inland 500 meters (topography) and offshore 1,000 meters or to laser extinction (bathymetry). The topographic lidar sensor has a pulse repetition rate of 9 kHz at 1064 nm (near-infrared wavelength). The bathymetric lidar sensor has a pulse repetition rate of 1 kHz at 532 nm (green wavelength). Native lidar data is not generally in a format accessible to most Geographical Information Systems (GIS). Specialized in-house and commercial software packages are used to process the native lidar data into 3-dimensional positions that can be imported into GIS software for visualization and further analysis. Horizontal positions, provided in decimal degrees of latitude and longitude, are referenced to the North American Datum of 1983 (NAD83). Vertical positions were referenced to the NAD83 ellipsoid and provided in meters. The National Geodetic Survey's (NGS) GEOID03 model was used to transform the vertical positions from ellipsoid to orthometric heights referenced to the North American Vertical Datum of 1988 (NAVD88). The positions are relative to NAD83 in decimal degrees of longitude and latitude. The heights were converted from ellipsoid to orthometric heights (NAVD88) using the Geoid03 model with the results in meters. Once converted to geoid heights, the data were then converted to IGLD85 using the VDatum program from NOAA (National Oceanic and Atmospheric Administration). The NOAA Coastal Services Center received the data and converted the hydro files from IGLD85 heights to NAVD88 heights using VDatum. The heights were then converted to ellipsoid heights using Geoid03. The topo files were converted from NAVD88 heights to ellipsoid heights using Geoid03. These files were converted for data storage and Digital Coast provisioning purposes.
|Distributor||DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National
Oceanic and Atmospheric Administration, U.S. Department of Commerce
|Dataset Point of Contact||Data Production Manager
US Army Corps of Engineers (USACE) Joint Airborne Lidar Bathymetry Technical Center of eXpertise (JALBTCX)
Documentation links not available.
|Data Presentation Form:||
|Dataset Progress Status||Complete|
|Data Update Frequency:||As needed|
|Purpose:||These data were collected as a part of the National Coastal Mapping Program (NCMP) to depict the elevations above and below the water along the Michigan coastal zone.|
|Time Period:||2009-07-27 to 2009-08-02|
|Spatial Reference System:||urn:ogc:def:crs:EPSG::4269 Ellipsoid in Meters|
|Spatial Bounding Box Coordinates:||
|Spatial Coverage Map:|
|Use Constraints||No constraint information available|
|Fees||Fee information not available.|
Last Modified: 2013-01-22
For questions about the information on this page, please email: firstname.lastname@example.org