National Geophysical Data Center (NGDC), NOAA Satellite and Information Service

Alternate Views: Get Data, FAQ, ISO Rubric, DOI Rubric, CSW, HTML, Components, XML

2009 US Army Corps of Engineers (USACE) Joint Airborne Lidar Bathymetry Technical Center of Expertise (JALBTCX) Topographic Lidar: South Texas Coast

browse graphicThis kmz file shows the extent of coverage for the 2009 USACE South Texas Coast lidar data set.
This Light Detection and Ranging (LiDAR) classified (ASPRS LAS classifications) dataset is a topographic survey conducted for the West Texas Aerial Survey 2009 project. This data was produced for the US Army Corps of Engineers (USACE) Joint Airborne Lidar Bathymetry Technical Center of Expertise (JALBTCX). The LiDAR point cloud was flown at a density sufficient to support a maximum final post spacing of 1 point per meter. 3001 International Inc. acquired 81 flightlines between February 3, 2009 and April 23, 2009. The West Texas Aerial Survey 2009 was collected under the guidance of a Professional Mapper/Surveyor. The area of coverage includes portions of the coastline in the following counties: Aransas, Brazoria, Calhoun, Cameron, Kenedy, Kleberg, Matagorda, Nueces, San Patricio, and Willacy.

Cite this dataset when used as a source.

Search and Download
    Distribution Formats
    • LAZ
    Distributor DOC/NOAA/NOS/CSC > Coastal Services Center, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
    Point of Contact US Army Corps of Engineers (USACE) Joint Airborne Lidar Bathymetry Technical Center of eXpertise (JALBTCX)
    228-252-1131 228-252-1121
    JALBTCX@usace.army.mil
    Documentation links not available.
    Originator
    • DOC/NOAA/NOS/CSC > Coastal Services Center, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
    Originator
    • US Army Corps of Engineers (USACE) Joint Airborne Lidar Bathymetry Technical Center of eXpertise (JALBTCX)
    Publisher
    • DOC/NOAA/NOS/CSC > Coastal Services Center, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
    Date(s)
    • publication: 2011-09-01
    Data Presentation Form: Digital image
    Dataset Progress Status Complete
    Data Update Frequency: Not planned
    Purpose: The West Texas Aerial Survey 2009 project will support the US Army Corps of Engineers (USACE) Joint Airborne Lidar Bathymetry Technical Center of Expertise (JALBTCX) collection of data representing the post-hurricane condition of the beaches, barrier islands, and lakeshores along the coasts of Texas.
    Use Limitations
    • These data depict the elevations at the time of the survey and are only accurate for that time. Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations. Any conclusions drawn from analysis of this information are not the responsibility of NOAA or any of its partners. These data are NOT to be used for navigational purposes.
    Time Period: 2009-02-03  to  2009-04-23
    Spatial Reference System: urn:ogc:def:crs:EPSG::4269 Ellipsoid in Meters
    Spatial Bounding Box Coordinates:
    N: 28.957342
    S: 25.951459
    E: -95.277455
    W: -97.403417
    Spatial Coverage Map:
    Themes
    • Bathymetry/Topography
    • Elevation
    • Height
    • LAS V.1.2 LiDAR
    • Topography
    • Lidar
    Places
    • United States
    • Texas
    • Aransas County
    • Brazoria County
    • Calhoun County
    • Cameron County
    • Kenedy County
    • Kleberg County
    • Matagorda County
    • Nueces County
    • San Patricio County
    • Willacy County
    Use Constraints No constraint information available
    Fees Fee information not available.
    Lineage Statement Lineage statement not available.
    Processor
    • 3001 International Inc.
    • 3001 International Inc.
    • DOC/NOAA/NOS/CSC > Coastal Services Center, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
    • DOC/NOAA/NESDIS/NGDC > National Geophysical Data Center, NESDIS, NOAA, U.S. Department of Commerce
    Processing Steps
    • The Airborne Global Position System (ABGPS), inertial measurement unit (IMU), and raw scans are collected during the LiDAR aerial survey. The ABGPS monitors the xyz position of the sensor and the IMU monitors the orientation of the aircraft. During the aerial survey laser pulses reflected from features on the surface and are detected by the receiver optics and collected by the data logger. GPS locations are based on data collected by receivers on the aircraft and base stations on the ground. The ground base stations are placed no more than 20 km radius from the flight survey area.
    • The ABGPS, IMU, and raw scans are integrated using proprietary software developed by Optech and delivered with the Optech ALTM Gemini System. The resultant file is in a LAS binary file format. The LAS file version 1.1 format can be easily transferred from one file format to another. It is a binary file format that maintains information specific to the LiDAR data (return#, intensity value, xyz, etc.). The resultant points are referenced to the Geographic NAD83 horizontal datum and NAVD88 vertical datum.
    • The data is subjected to rigorous QA/QC according to the 3001 Inc. Quality Control Plan and procedures. Very briefly, a series of quantitative and visual procedures are employed to validate the accuracy and consistency of the data. Ground control is established by 3001, Inc. and GPS-derived ground control points (GCPs) points in various areas of dominant and prescribed land cover. These points are coded according to landcover, surface material, and ground control suitability. A suitable number of points are selected for calculation of a statistically significant accuracy assessment as per the requirements of the National Standard for Spatial Data Accuracy. A spatial proximity analysis is used to select edited LiDAR data points within a specified distance of the relevant GCPs. A search radius decision rule is applied with consideration of terrain complexity, cumulative error, and adequate sample size. Accuracy validation and evaluation is accomplished using proprietary software to apply relevant statistical routines for calculation of Root Mean Square Error (RMSE) and the National Standard for Spatial Data Accuracy (NSSDA) according to Federal Geographic Data Committee (FGDC) specifications.
    • Metadata imported.
    • The NOAA Coastal Services Center (CSC) received classified data (ASPRS LAS classifications) in las format. The files contained LiDAR intensity and elevation measurements. CSC performed the following processing for data storage and Digital Coast provisioning purposes: 1. The data were converted from NAVD88 heights to ellipsoid heights using Geoid03. 2. The LAS header fields were sorted by latitude and updated.
    • The NOAA National Geophysical Data Center (NGDC) received lidar data files via ftp transfer from the NOAA Coastal Services Center. The data are currently being served via NOAA CSC Digital Coast at http://www.csc.noaa.gov/digitalcoast/. The data can be used to re-populate the system. The data are archived in LAS or LAZ format. The LAS format is an industry standard for LiDAR data developed by the American Society of Photogrammetry and Remote Sensing (ASPRS); LAZ is a loseless compressed version of LAS developed by Martin Isenburg (http://www.laszip.org/). The data are exclusively in geographic coordinates (either NAD83 or ITRF94). The data are referenced vertically to the ellipsoid (either GRS80 or ITRF94), allowing for the ability to apply the most up to date geoid model when transforming to orthometric heights.

    Metadata Last Modified: 2013-06-04

    For questions about the information on this page, please email: mike.sutherland@noaa.gov