|2010 U.S. Geological Survey (USGS) Topographic LiDAR: San Francisco Bay, California|
|The primary purpose of this project was to develop a consistent and accurate surface elevation dataset derived from high-accuracy Light Detection and Ranging (LiDAR) technology for the USGS San Francisco Coastal LiDAR project area. The LiDAR data were processed to a bare-earth digital terrain model (DTM). Detailed breaklines and bare-earth DEMs were produced for the project area. Data was formatted according to tiles with each tile covering an area of 1500 m by 1500 m. A total of 712 tiles were produced for the project encompassing an area of approximately 610 sq. miles. This metadata relates to LAS that were classified in the following classes: Class 1 = Unclassified. This class includes vegetation, buildings, noise etc. Class 2 = Ground Class 7= Noise Class 9 = Water Class 10= Ignored Ground (due to proximity to breakline)|
|Get the Data|
|Access||Format(s)||Distributor(s) / Contact Info||Instructions / Constraints|
- Format version:
(version is unknown)
(organisationName is template)
- Ordering Instructions
- The National Geophysical Data Center serves as the archive for this LIDAR data. NGDC should only be contacted for this data if it cannot be obtained from NOAA Coastal Services Center.
- The National Geophysical Data Center serves as the archive for this LIDAR dataset. NGDC should only be contacted for the data if it cannot be obtained from NOAA Coastal Services Center.