|2011 Delaware Department of Natural Resources and Environmental Control (DNREC) Lidar: Bombay Hook National Wildlife Refuge|
|Terrapoint collected LiDAR for over 177 square kilometers of the Bombay Hook National Wildlife Refuge in Kent County, Delaware. The nominal pulse spacing for this project was no greater than 0.75 meters. This project was collected with a sensor which collects waveform data and provides an intensity value for each discrete pulse extracted from the waveform. GPS Week Time, Intensity, Flightline and echo number attributes were provided for each LiDAR point. Dewberry used proprietary procedures to classify the LAS according to project specifications: 1-Unclassified, 2-Ground, 7-Noise, 9-Water, 12-Overlap. Once the data was received by NOAA CSC, all of the class 7 (noise) points were removed from the data set. Dewberry produced classified LAS and DEMs for the 99 tiles (1700 m x 1700 m) that cover the project area.|
|Get the Data|
|Access||Format(s)||Distributor(s) / Contact Info||Instructions / Constraints|
- Format version:
(version is unknown)
(organisationName is template)
- Ordering Instructions
- The National Geophysical Data Center serves as the archive for this LIDAR data. NGDC should only be contacted for this data if it cannot be obtained from NOAA Coastal Services Center.
- The National Geophysical Data Center serves as the archive for this LIDAR dataset. NGDC should only be contacted for the data if it cannot be obtained from NOAA Coastal Services Center.