2011 U.S. Geological Survey (USGS) Alabama Topographic LiDAR: Baldwin County East and WestBack to Collection NOAA/NESDIS/NGDC/MGG/Lidar
View Metadata As: Get Data, FAQ, HTML, 19139 XML
Assess Metadata For: Completeness, DOI Readiness, CSW Readiness, Components
2011 U.S. Geological Survey (USGS) Alabama Topographic LiDAR: Baldwin County East and West
browse graphicUSGS Contract: G10PC00026 Task Order Number: G10PD02126 LiDAR was collected at a 2.0 meter nominal post spacing (2.0m GSD) for approximately 329 square miles of Baldwin County, Alabama, while no snow was on the ground and rivers were at or below normal levels. Project was divided into two separate AOIs, Baldwin West and Baldwin East. Project meets U.S. Geological Survey National Geospatial Program Base LiDAR Specification, Version 13. LAS Classifications: Class 1: Unclassified Class 2: Bare Earth Ground Class 5: High Vegetation Class 7: Noise (Low points) Class 9: Water Class 10: Ignored Ground (within 1m of breakline) Class 12: Overlap Class 13: Witheld

Get the Data
AccessFormat(s)Distributor(s) / Contact InfoInstructions / Constraints
LAZ
Format version: (version is unknown)

(organisationName is template)
Ordering Instructions
The National Geophysical Data Center serves as the archive for this LIDAR data. NGDC should only be contacted for this data if it cannot be obtained from NOAA Coastal Services Center.

The National Geophysical Data Center serves as the archive for this LIDAR dataset. NGDC should only be contacted for the data if it cannot be obtained from NOAA Coastal Services Center.