ISO Table View Alternate Views: Get Data, FAQ, ISO Rubric, DOI Rubric, CSW, HTML, Components, XML

Metadata Identifier: gov.noaa.csc.maps:me2009_fema_fortkent_m2481

Aggregation Info | Bands | Citations | Constraints | Coverage Descriptions | Dimensions | Extents | Formats | Geographic Bounding Box
Georectified Information | Georeferenceable Information | Identifiers | Instruments | Mediums | OnlineResources | Operations
Platforms | Process Steps | Range Elements | Reference Systems | Responsible Parties | Series | Sources | Spatial Grids | Temporal Extents

MD_DataIdentification

Count Component Title Abstract
1 2009 Federal Emergency Management Agency (FEMA) Topographic LiDAR: Fort Kent, Maine Camp Dresser McKee Inc. contracted with Sanborn Map Company to provide LiDAR mapping services for Fort Kent, Maine. Utilizing multi-return systems, Light Detection and Ranging (LiDAR) data in the form of 3-dimensional positions of a dense set of mass points was collected in spring 2009 for 187 square miles along the St. Johns River and the Fish River. The Leica ALS-50 LiDAR system was used to collect data for the survey campaign. The nominal point spacing of this data set is 1.4 meters. Leica ALS-50 LiDAR System Acquisition Parameters: Average Altitude: 1400 Meters above ground level Airspeed: ~120 Knots Scan Frequency: 36 Hertz Scan Width Half Angle: 20 Degrees Pulse Rate: 76,200 Hertz
Top

SV_Identification

none found
Top

CI_Citation

Count Component Title Date Citation Identifier
1 2009 Federal Emergency Management Agency (FEMA) Topographic LiDAR: Fort Kent, Maine
  • 2013-04-01
2 None
    1 North American Datum 1983
    • 2007-01-19
    Top

    CI_Series

    none found
    Top

    CI_ResponsibleParty

    Count Component Individual Organization Position Email Role Linkage
    1 Mike Sutherland(author) author
    1 resourceProvider http://www.epsg-registry.org/export.htm?gml=urn:ogc:def:crs:EPSG::4269
    1 NOAA CSC (publisher) publisher
    1 NOAA CSC(distributor) distributor
    2 NOAA CSC (processor) processor
    3 Andrew Lucero Sanborn Map Company Sr. Project Manager alucero@sanborn.com processor
    1 DHS/FEMA > Federal Emergency Management Agency, U.S. Department of Homeland Security originator
    1 EPSG Registry European Petroleum Survey Group publisher http://www.epsg-registry.org/
    1 Federal Emergency Management Agency, Region I Flood Insurance and Mitigation Division pointOfContact
    Unresolved Xlinks
    Mike Sutherland(author) at: /gmi:MI_Metadata/gmd:contact[1]
    NOAA CSC (originator) at: /gmi:MI_Metadata/gmd:identificationInfo[1]/gmd:MD_DataIdentification[1]/gmd:citation[1]/gmd:CI_Citation[1]/gmd:citedResponsibleParty[1]
    NOAA CSC (publisher) at: /gmi:MI_Metadata/gmd:identificationInfo[1]/gmd:MD_DataIdentification[1]/gmd:citation[1]/gmd:CI_Citation[1]/gmd:citedResponsibleParty[3]
    NOAA CSC(distributor) at: /gmi:MI_Metadata/gmd:distributionInfo[1]/gmd:MD_Distribution[1]/gmd:distributor[1]/gmd:MD_Distributor[1]/gmd:distributorContact[1]
    Mike Sutherland at: /gmi:MI_Metadata/gmd:distributionInfo[1]/gmd:MD_Distribution[1]/gmd:distributor[2]/gmd:MD_Distributor[1]/gmd:distributorContact[1]
    NOAA CSC (processor) at: /gmi:MI_Metadata/gmd:dataQualityInfo[1]/gmd:DQ_DataQuality[1]/gmd:lineage[1]/gmd:LI_Lineage[1]/gmd:processStep[4]/gmi:LE_ProcessStep[1]/gmd:processor[1]
    Mike Sutherland (processor) at: /gmi:MI_Metadata/gmd:dataQualityInfo[1]/gmd:DQ_DataQuality[1]/gmd:lineage[1]/gmd:LI_Lineage[1]/gmd:processStep[5]/gmi:LE_ProcessStep[1]/gmd:processor[1]
    Top

    CI_OnlineResource

    Count Component Linkage Name Description Function
    1 http://www.epsg-registry.org/ European Petroleum Survey Group Geodetic Parameter Registry Registry that accesses the EPSG Geodetic Parameter Dataset, which is a structured dataset of Coordinate Reference Systems and Coordinate Transformations. search
    1 http://www.epsg-registry.org/export.htm?gml=urn:ogc:def:crs:EPSG::4269 NAD83 Link to Geographic Markup Language (GML) description of reference system. information
    Top

    MD_Identifier or RS_Identifier

    Count Component Code
    1 Ellipsoid in Meters
    1 urn:ogc:def:crs:EPSG::4269
    Top

    EX_Extent

    Bounding Box Temporal Extent
    Count Component Description West East North South Start End
    1 -69.156918 -68.324960 47.376866 47.019353
    Top

    EX_GeographicBoundingBox

    Count Component West East North South
    1 -69.156918 -68.324960 47.376866 47.019353
    Top

    EX_TemporalExtent

    Count Component Start End
    1
    Top

    MD_Format

    Count Component Name Version specification
    1 LAZ
    Top

    MD_Medium

    none found
    Top

    MD_Constraints

    Unresolved Xlinks
    Lidar Use Limitation at: /gmi:MI_Metadata/gmd:identificationInfo[1]/gmd:MD_DataIdentification[1]/gmd:resourceConstraints[1]
    NOAA Legal Statement at: /gmi:MI_Metadata/gmd:identificationInfo[1]/gmd:MD_DataIdentification[1]/gmd:resourceConstraints[2]
    Top

    MD_ReferenceSystem

    Count Component Code Authority Title
    1 Ellipsoid Ellipsoid in Meters
    1 NAD83 urn:ogc:def:crs:EPSG::4269 North American Datum 1983
    Top

    MD_GridSpatialRepresentation

    none found
    Top

    MD_Georeferenceable or MI_Georeferenceable

    none found
    Top

    MD_Georectified or MI_Georectified

    none found
    Top

    MD_Dimension

    none found
    Top

    MD_CoverageDescription or MI_CoverageDescription

    none found
    Top

    MD_Band or MI_Band

    none found
    Top

    MI_RangeElementDescription

    none found
    Top

    MD_AggregateInformation

    none found
    Top

    LE_Source or LI_Source

    none found
    Top

    LE_ProcessStep or LI_ProcessStep

    Count Component DateTime Description
    1 2009-01-01T00:00:00 The unedited data are classified to facilitate the application of the appropriate feature extraction filters. A combination of proprietary filters is applied as appropriate for the production of bare earth digital terrain models (dtms). Interactive editing methods are applied to those areas where it is inappropriate or impossible to use the feature extraction filters, based upon the design criteria and/or limitations of the relevant filters. These same feature extraction filters are used to produce elevation height surfaces. The LiDAR mass points were delivered in American Society for Photogrammetry and Remote Sensing LAS 1.1 format. The header file for each dataset is complete as define by the LAS 1.1 specification. The data was classified as follows: Class 1 = Unclassified. This class includes vegetation, buildings, noise etc. Class 2 = Ground.
    1 2009-01-01T00:00:00 Conversion from Geodetic coordinates wgs84 into Maine State Plane East coordinates using NAD83 and conversion from ellipsoid heights (meters) into orthometric heights (U.S. Survey Feet).
    1 2009-05-13T00:00:00 The ABGPS, IMU, and raw Leica ALS-50 LiDAR data are integrated into the LEICA ALS post processor software. The resultant file is in a LAS binary file format. The LAS file version 1.1 formats can be easily transferred from one file format to another. It is a binary file format that maintains information specific to the LiDAR data (return#, intensity value, xyz, etc.). The resultant points are produced in the geodetic coordinates referenced to the NAD83 horizontal datum and GRS80 vertical datum.
    1 2013-04-01T00:00:00 The NOAA Coastal Services Center (CSC) received the topographic files in .las.gz compressed format. The files were LAS version 1.1. The files contained lidar elevation measurements. The data were received in NAD83 Maine State Plane 2000 East coordinates coordinates and were vertically referenced to NAVD88 using the Geoid03 model. The vertical units of the data were feet. CSC performed the following processing for data storage and Digital Coast provisioning purposes: 1. The compressed .las.gz files were uncompressed to LASV1.1 format. 2. The topographic las files were converted from a Projected Coordinate System (Maine SP 2000 East) to a Geographic Coordinate system (GCS). 3. The topographic las files' horizontal units were converted from feet to decimal degrees. 4. The topographic las files were converted from orthometric (NAVD88) heights to ellipsoidal heights using Geoid03. 5. The topographic las files' vertical units were converted from feet to meters. 6. The data were converted to LAZ format.
    NOAA CSC (processor) at Xpath: /gmi:MI_Metadata/gmd:dataQualityInfo[1]/gmd:DQ_DataQuality[1]/gmd:lineage[1]/gmd:LI_Lineage[1]/gmd:processStep[4]/gmi:LE_ProcessStep[1]/gmd:processor[1]
    1 2013-05-17T00:00:00 The NOAA National Geophysical Data Center (NGDC) received lidar data files via ftp transfer from the NOAA Coastal Services Center. The data are currently being served via NOAA CSC Digital Coast at http://www.csc.noaa.gov/digitalcoast/. The data can be used to re-populate the system. The data are archived in LAS or LAZ format. The LAS format is an industry standard for LiDAR data developed by the American Society of Photogrammetry and Remote Sensing (ASPRS); LAZ is a loseless compressed version of LAS developed by Martin Isenburg (http://www.laszip.org/). The data are exclusively in geographic coordinates (either NAD83 or ITRF94). The data are referenced vertically to the ellipsoid (either GRS80 or ITRF94), allowing for the ability to apply the most up to date geoid model when transforming to orthometric heights.
    Mike Sutherland (processor) at Xpath: /gmi:MI_Metadata/gmd:dataQualityInfo[1]/gmd:DQ_DataQuality[1]/gmd:lineage[1]/gmd:LI_Lineage[1]/gmd:processStep[5]/gmi:LE_ProcessStep[1]/gmd:processor[1]
    Top

    MI_Operation

    none found
    Top

    MI_Platform

    none found
    Top

    MI_Instrument

    none found
    Top