FAQ for ISO 19115 and 19115-2 Alternate Views: Get Data, FAQ, ISO Rubric, DOI Rubric, CSW, HTML, Components, XML
2009 Federal Emergency Management Agency (FEMA) Topographic LiDAR: Fort Kent, Maine
browse graphic Camp Dresser McKee Inc. contracted with Sanborn Map Company to provide LiDAR mapping services for Fort Kent, Maine. Utilizing multi-return systems, Light Detection and Ranging (LiDAR) data in the form of 3-dimensional positions of a dense set of mass points was collected in spring 2009 for 187 square miles along the St. Johns River and the Fish River. The Leica ALS-50 LiDAR system was used to collect data for the survey campaign. The nominal point spacing of this data set is 1.4 meters. Leica ALS-50 LiDAR System Acquisition Parameters: Average Altitude: 1400 Meters above ground level Airspeed: ~120 Knots Scan Frequency: 36 Hertz Scan Width Half Angle: 20 Degrees Pulse Rate: 76,200 Hertz