2009 Federal Emergency Management Agency (FEMA) Topographic LiDAR: Fort Kent, MaineAlternate Views: Get Data, FAQ, ISO Rubric, DOI Rubric, CSW, HTML, Components, XML
2009 Federal Emergency Management Agency (FEMA) Topographic LiDAR: Fort Kent, Maine
browse graphicCamp Dresser McKee Inc. contracted with Sanborn Map Company to provide LiDAR mapping services for Fort Kent, Maine. Utilizing multi-return systems, Light Detection and Ranging (LiDAR) data in the form of 3-dimensional positions of a dense set of mass points was collected in spring 2009 for 187 square miles along the St. Johns River and the Fish River. The Leica ALS-50 LiDAR system was used to collect data for the survey campaign. The nominal point spacing of this data set is 1.4 meters. Leica ALS-50 LiDAR System Acquisition Parameters: Average Altitude: 1400 Meters above ground level Airspeed: ~120 Knots Scan Frequency: 36 Hertz Scan Width Half Angle: 20 Degrees Pulse Rate: 76,200 Hertz

Get the Data
AccessFormat(s)Distributor(s) / Contact InfoInstructions / Constraints
LAZ
Format version: (version is unknown)

(organisationName is template)
Ordering Instructions
The National Geophysical Data Center serves as the archive for this LIDAR data. NGDC should only be contacted for this data if it cannot be obtained from NOAA Coastal Services Center.

The National Geophysical Data Center serves as the archive for this LIDAR dataset. NGDC should only be contacted for the data if it cannot be obtained from NOAA Coastal Services Center.