ISO Table View View Metadata As: Get Data, FAQ, HTML, 19139 XML
Assess Metadata For: Completeness, DOI Readiness, CSW Readiness, Components

Metadata Identifier: gov.noaa.csc.maps:ms20092010_usace_phaseII_m2600

Aggregation Info | Bands | Citations | Constraints | Coverage Descriptions | Dimensions | Extents | Formats | Geographic Bounding Box
Georectified Information | Georeferenceable Information | Identifiers | Instruments | Mediums | OnlineResources | Operations
Platforms | Process Steps | Range Elements | Reference Systems | Responsible Parties | Series | Sources | Spatial Grids | Temporal Extents

MD_DataIdentification

Count Component Title Abstract
1 2009-2010 USACE Vicksburg District Lidar: Mississippi River Delta Phase II Phase two will consist of post processing of the data collected. Aeroquest Optimal, Inc. shall process the digital elevation data from a precision airborne (LIDAR) survey within the entire project area. The proposed project area is approximately 6.3 million acres. The purpose of the survey is to obtain measurements of the bare ground surface, as well as top surface feature elevation data for providing geometry input to USACE hydraulic modeling program. This project for USACE, Vicksburg District was to provide digital orthophotography using DMC imagery for approximately 4,120 square miles located in NW Mississippi at a 2-foot pixel resolution.
Top

SV_Identification

none found
Top

CI_Citation

Count Component Title Date Citation Identifier
1 2009-2010 USACE Vicksburg District Lidar: Mississippi River Delta Phase II
  • 2013-12-20
1 Lidar Final Report
    1 None
      1 North American Datum 1983
      • 2007-01-19
      1 none
        Top

        CI_Series

        none found
        Top

        CI_ResponsibleParty

        Count Component Individual Organization Position Email Role Linkage
        1 resourceProvider http://www.epsg-registry.org/export.htm?gml=urn:ogc:def:crs:EPSG::4269
        1 Citation URL http://csc.noaa.gov/htdata/lidar1_z/geoid12a/data/2600/supplemental/ms2009_2010_usace_phaseII.pdf
        1 Chris Jaeger Aeroquest Optimal, Inc. Project Manager chris.jaeger@optimalgeo.com processor
        1 NOAA CSC (originator) DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce coastal.info@noaa.gov originator http://coast.noaa.gov
        1 NOAA CSC (publisher) DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce coastal.info@noaa.gov publisher http://coast.noaa.gov
        1 NOAA CSC(distributor) DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce coastal.info@noaa.gov distributor http://coast.noaa.gov
        1 NOAA CSC (processor) DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce coastal.info@noaa.gov processor http://coast.noaa.gov
        1 Elijah C. Hunt U.S. Army Corps of Engineers, Vicksburg District elijah.c.hunt@us.army.mil pointOfContact
        1 EPSG Registry European Petroleum Survey Group publisher http://www.epsg-registry.org/
        1 Mike Sutherland(author) Mike Sutherland DOC/NOAA/NESDIS/NGDC > National Geophysical Data Center, NESDIS, NOAA, U.S. Department of Commerce mike.sutherland@noaa.gov author
        1 Mike Sutherland Mike Sutherland DOC/NOAA/NESDIS/NGDC > National Geophysical Data Center, NESDIS, NOAA, U.S. Department of Commerce mike.sutherland@noaa.gov distributor
        1 Mike Sutherland (processor) Mike Sutherland DOC/NOAA/NESDIS/NGDC > National Geophysical Data Center, NESDIS, NOAA, U.S. Department of Commerce mike.sutherland@noaa.gov processor
        1 United State Army Corps of Engineers (USACE) Vicksburg District originator
        Top

        CI_OnlineResource

        Count Component Linkage Name Description Function
        4 http://coast.noaa.gov
        1 http://csc.noaa.gov/htdata/lidar1_z/geoid12a/data/2600/supplemental/ms2009_2010_usace_phaseII.pdf Lidar Final Report information
        1 http://www.epsg-registry.org/ European Petroleum Survey Group Geodetic Parameter Registry Registry that accesses the EPSG Geodetic Parameter Dataset, which is a structured dataset of Coordinate Reference Systems and Coordinate Transformations. search
        1 http://www.epsg-registry.org/export.htm?gml=urn:ogc:def:crs:EPSG::4269 NAD83 Link to Geographic Markup Language (GML) description of reference system. information
        Top

        MD_Identifier or RS_Identifier

        Count Component Code
        1 Ellipsoid in Meters
        1 urn:ogc:def:crs:EPSG::4269
        Top

        EX_Extent

        Bounding Box Temporal Extent
        Count Component Description West East North South Start End
        1 -90.0886487 -88.8334027 34.9810040 33.6759277 2009-12-17 2010-07-09
        Top

        EX_GeographicBoundingBox

        Count Component West East North South
        1 -90.0886487 -88.8334027 34.9810040 33.6759277
        Top

        EX_TemporalExtent

        Count Component Start End
        1 2009-12-17 2010-07-09
        Top

        MD_Format

        Count Component Name Version specification
        1 LAZ
        Top

        MD_Medium

        none found
        Top

        MD_Constraints

        Count Component Use Limitation
        1 Lidar Use Limitation These data depict the elevations at the time of the survey and are only accurate for that time. Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations. Any conclusions drawn from analysis of this information are not the responsibility of NOAA or any of its partners. These data are NOT to be used for navigational purposes.
        Top

        MD_ReferenceSystem

        Count Component Code Authority Title
        1 Ellipsoid Ellipsoid in Meters
        1 NAD83 urn:ogc:def:crs:EPSG::4269 North American Datum 1983
        Top

        MD_GridSpatialRepresentation

        none found
        Top

        MD_Georeferenceable or MI_Georeferenceable

        none found
        Top

        MD_Georectified or MI_Georectified

        none found
        Top

        MD_Dimension

        none found
        Top

        MD_CoverageDescription or MI_CoverageDescription

        none found
        Top

        MD_Band or MI_Band

        none found
        Top

        MI_RangeElementDescription

        none found
        Top

        MD_AggregateInformation

        Count Component Title Code Association Type Code
        1 Lidar Final Report crossReference
        Top

        LE_Source or LI_Source

        none found
        Top

        LE_ProcessStep or LI_ProcessStep

        Count Component DateTime Description
        1 For redundancy and accuracy purposes, the airborne GPS data were processed from two base stations using POSGPS from Applanix, Inc. The agreement between a minimum of two solutions checked or combined between a minimum of two stations was better than 10 cm in each of X, Y, and Z. These trajectories were used in the processing of the inertial data. The inertial data were processed using POSProc from Applanix, Inc. This software produces an SBET (?smooth best estimate of trajectory?) using the GPS trajectory from POSGPS and the roll, pitch and heading information recorded by the POS (Position Orientation System). DASHMap uses the SBET to generate a set of data points for each laser return in the LAS file format. Each data point is assigned an echo value so it can be segregated based on the first and last pulse information. This project?s data were processed in strip form, meaning each flight line was processed independently. Processing the lines individually provides the data analyst with the ability to QC the overlap between lines. Each strip was then imported into a project using TerraScan (Terrasolid, Ltd.) and the project management tool GeoCue (GeoCue Corp.). By creating a project the various flightlines are combined while breaking the dataset as a whole into manageable pieces. This process also converts the dataset from the geographic coordinate system (NAD83) to the State Plane Coordinate System (NAD83), Mississippi West, Feet, and utilizing standard ESRI transformations. The ellipsoid height values were converted to NAVD88, Feet, orthometric values using Geoid03, provided by NGS. Individual lines were then checked against adjacent lines and intersecting control lines to ensure a cohesive dataset. The data from each line were then combined and LiDAR intensity images were produced to visually check the horizontal positioning of the LiDAR data. Stereo pairs were generated from the LiDAR intensity data using Geocue and LiDAR1CuePac (Geocue Corp.). LiDARgrammetry was then utilized to collect breaklines where necessary along hydro features to support the contour generation. These breaklines were collected as a 3D element in the MicroStation (Bentley Systems, Inc.) environment utilizing ISSD (Z/I Imaging). A Triangular Irregular Network (TIN) was generated using the final surface data. Contours were then created from the TIN utilizing TerraModeler (Terrasolid, Ltd.).
        1 2010-03-05T00:00:00 During acquisition, two base stations were used to support the precise positioning and orientation of the LiDAR sensor head. At times an additional base station set at the Oxford Airport was used as a back-up. The base stations were positioned so that the aircraft would be no further than 20-miles from a single base station at any time during the flight and were placed on the control points established by Maptech during the ground control phase of the project. The LiDAR acquisition commenced on December 17, 2009 and was completed on March 5, 2010. Initial processing of the LiDAR data determined that reflights were necessary; in part because of sensor or base station malfunctions. The reflights occurred between June 27, 2010 and July 9, 2010. To achieve better penetration of the vegetation during the reflights, two passes were conducted over the reflight area; one in each direction. Detailed flight information and flight logs can be found in the separate Flight Report submitted with the project.
        1 2013-12-20T00:00:00 The NOAA Coastal Services Center (CSC) received topographic files in text format from the Mississippi Department of Environmental Quality (MDEQ). The files contained lidar easting, northing and elevation. The data were received in Mississippi State Plane West 2302, NAD83 coordinates and were vertically referenced to NAVD88 using the Geoid03 model. The vertical and horizontal units of the data were feet. CSC performed the following processing for data storage and Digital Coast provisioning purposes: 1. The ASCII files were converted from txt format to las format using LASTools' txt2las 2. The LAS tiles were retiled to remove the buffer, then duplicate points were removed 3. The LAS tiles were then run through LASGround in order to extract surface classifications. 4. The las files were converted from orthometric (NAVD88) heights to ellipsoidal heights using Geoid03. 5. The las files' vertical units were converted from feet to meters, removing bad elevations. 6. The las files were converted from a Projected Coordinate System (MS SP West) to a Geographic Coordinate system (NAD83) 7. The las files' horizontal units were converted from feet to decimal degrees. 8. The data were converted to LAZ format.
        1 2013-12-31T00:00:00 The NOAA National Geophysical Data Center (NGDC) received lidar data files via ftp transfer from the NOAA Coastal Services Center. The data are currently being served via NOAA CSC Digital Coast at http://www.csc.noaa.gov/digitalcoast/. The data can be used to re-populate the system. The data are archived in LAS or LAZ format. The LAS format is an industry standard for LiDAR data developed by the American Society of Photogrammetry and Remote Sensing (ASPRS); LAZ is a loseless compressed version of LAS developed by Martin Isenburg (http://www.laszip.org/). The data are exclusively in geographic coordinates (either NAD83 or ITRF94). The data are referenced vertically to the ellipsoid (either GRS80 or ITRF94), allowing for the ability to apply the most up to date geoid model when transforming to orthometric heights.
        Top

        MI_Operation

        none found
        Top

        MI_Platform

        none found
        Top

        MI_Instrument

        none found
        Top