2009 US Army Corps of Engineers (USACE) Joint Airborne Lidar Bathymetry Technical Center of Expertise (JALBTCX) Topobathy Lidar: Apostle Islands, WIView Metadata As: Get Data, FAQ, HTML, 19139 XML
Assess Metadata For: Completeness, DOI Readiness, CSW Readiness, Components
2009 US Army Corps of Engineers (USACE) Joint Airborne Lidar Bathymetry Technical Center of Expertise (JALBTCX) Topobathy Lidar: Apostle Islands, WI
browse graphicThese files contain topographic and bathymetric lidar data collected by the Compact Hydrographic Airborne Rapid Total Survey (CHARTS) system along the coast of Wisconsin. CHARTS integrates topographic and bathymetric lidar sensors, a digital camera and a hyperspectral scanner on a single remote sensing platform for use in coastal mapping and charting activities. Data coverage generally extends along the coastline from the waterline inland 500 meters (topography) and offshore 1,000 meters or to laser extinction (bathymetry). The topographic lidar sensor has a pulse repetition rate of 9 kHz at 1064 nm (near-infrared wavelength). The bathymetric lidar sensor has a pulse repetition rate of 1 kHz at 532 nm (green wavelength). Native lidar data is not generally in a format accessible to most Geographical Information Systems (GIS). Specialized in-house and commercial software packages are used to process the native lidar data into 3-dimensional positions that can be imported into GIS software for visualization and further analysis. Horizontal positions, provided in decimal degrees of latitude and longitude, are referenced to the North American Datum of 1983 (NAD83). Vertical positions were referenced to the NAD83 ellipsoid and provided in meters. The National Geodetic Survey’s (NGS) GEOID03 model was used to transform the vertical positions from ellipsoid to orthometric heights referenced to the North American Vertical Datum of 1988 (NAVD88). The format of the files was LAS version 1.0. The NOAA Coastal Services Center received the data and converted the topo and hydro files from NAVD88 heights to ellipsoid heights using GEOID03. These files were converted for data storage and Digital Coast provisioning purposes. The topographic points are classified as 0 (never classified) and the bathymetric points are classified as 11 (CSC bathymetry).

Get the Data
AccessFormat(s)Distributor(s) / Contact InfoInstructions / Constraints
LAZ
Format version: (version is unknown)
DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
843-740-1200Mike Sutherland
DOC/NOAA/NESDIS/NGDC > National Geophysical Data Center, NESDIS, NOAA, U.S. Department of Commerce
303-497-6120
7:30am-5:00pm Mountain
Ordering Instructions
The National Geophysical Data Center serves as the archive for this LIDAR data. NGDC should only be contacted for this data if it cannot be obtained from NOAA Coastal Services Center.

The National Geophysical Data Center serves as the archive for this LIDAR dataset. NGDC should only be contacted for the data if it cannot be obtained from NOAA Coastal Services Center.

Use Limitation
These data depict the elevations at the time of the survey and are only accurate for that time. Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations. Any conclusions drawn from analysis of this information are not the responsibility of NOAA or any of its partners. These data are NOT to be used for navigational purposes.

Legal Constraints