ISO Table View View Metadata As: Get Data, FAQ, HTML, 19139 XML
Assess Metadata For: Completeness, DOI Readiness, CSW Readiness, Components

Metadata Identifier: gov.noaa.csc.maps:wa2005_pslc_yakima_m2585

Aggregation Info | Bands | Citations | Constraints | Coverage Descriptions | Dimensions | Extents | Formats | Geographic Bounding Box
Georectified Information | Georeferenceable Information | Identifiers | Instruments | Mediums | OnlineResources | Operations
Platforms | Process Steps | Range Elements | Reference Systems | Responsible Parties | Series | Sources | Spatial Grids | Temporal Extents

MD_DataIdentification

Count Component Title Abstract
1 2005 Puget Sound LiDAR Consortium (PSLC) Topographic LiDAR: Yakima County Terrapoint collected Light Detection and Ranging (LiDAR) data to complete the 2005 project for Yakima County. This project has partial coverage of Yakima County, totaling 4757 sq km in southern Washington. The Airborne LiDAR survey was conducted using Terrapoint?s 40 kHz ALTMS (Airborne Laser Terrain Mapping System), flying at an optimum height of 3500 ft AGL at 140 knots. The system consists of a 36-degree full angle laser, a Trimble 4700 GPS receiver and a Honeywell H764 IMU unit. This metadata is a collaboration of ancillary reports.
Top

SV_Identification

none found
Top

CI_Citation

Count Component Title Date Citation Identifier
1 2005 Puget Sound LiDAR Consortium (PSLC) Topographic LiDAR: Yakima County
  • 2013-11-14
1 None
    1 North American Datum 1983
    • 2007-01-19
    1 none
      Top

      CI_Series

      none found
      Top

      CI_ResponsibleParty

      Count Component Individual Organization Position Email Role Linkage
      1 resourceProvider http://www.epsg-registry.org/export.htm?gml=urn:ogc:def:crs:EPSG::4269
      1 NOAA CSC (originator) DOC/NOAA/NOS/CSC > Coastal Services Center, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce csc.info@noaa.gov originator
      1 NOAA CSC (publisher) DOC/NOAA/NOS/CSC > Coastal Services Center, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce csc.info@noaa.gov publisher
      1 NOAA CSC(distributor) DOC/NOAA/NOS/CSC > Coastal Services Center, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce csc.info@noaa.gov distributor
      1 NOAA CSC (processor) DOC/NOAA/NOS/CSC > Coastal Services Center, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce csc.info@noaa.gov processor
      1 Diana Martinez - originator - Puget Sound Lidar Consortium (PSLC) Diana Martinez Puget Sound Lidar Consortium (PSLC) Senior GIS Analyst, Puget Sound Regional Council dmartinez@psrc.org originator
      1 Diana Martinez - pointOfContact - Puget Sound Lidar Consortium (PSLC) Diana Martinez Puget Sound Lidar Consortium (PSLC) Senior GIS Analyst, Puget Sound Regional Council dmartinez@psrc.org pointOfContact
      1 EPSG Registry European Petroleum Survey Group publisher http://www.epsg-registry.org/
      1 Mike Sutherland(author) Mike Sutherland DOC/NOAA/NESDIS/NGDC > National Geophysical Data Center, NESDIS, NOAA, U.S. Department of Commerce mike.sutherland@noaa.gov author
      1 Mike Sutherland Mike Sutherland DOC/NOAA/NESDIS/NGDC > National Geophysical Data Center, NESDIS, NOAA, U.S. Department of Commerce mike.sutherland@noaa.gov distributor
      1 Mike Sutherland (processor) Mike Sutherland DOC/NOAA/NESDIS/NGDC > National Geophysical Data Center, NESDIS, NOAA, U.S. Department of Commerce mike.sutherland@noaa.gov processor
      Top

      CI_OnlineResource

      Count Component Linkage Name Description Function
      1 http://www.epsg-registry.org/ European Petroleum Survey Group Geodetic Parameter Registry Registry that accesses the EPSG Geodetic Parameter Dataset, which is a structured dataset of Coordinate Reference Systems and Coordinate Transformations. search
      1 http://www.epsg-registry.org/export.htm?gml=urn:ogc:def:crs:EPSG::4269 NAD83 Link to Geographic Markup Language (GML) description of reference system. information
      Top

      MD_Identifier or RS_Identifier

      Count Component Code
      1 Ellipsoid in Meters
      1 Terrapoint ALTMS
      1 urn:ogc:def:crs:EPSG::4269
      Top

      EX_Extent

      Bounding Box Temporal Extent
      Count Component Description West East North South Start End
      1 -120.95789169 -120.08245047 46.72436888 46.08705774 2005-03-25 2005-03-28
      Top

      EX_GeographicBoundingBox

      Count Component West East North South
      1 -120.95789169 -120.08245047 46.72436888 46.08705774
      Top

      EX_TemporalExtent

      Count Component Start End
      1 2005-03-25 2005-03-28
      Top

      MD_Format

      Count Component Name Version specification
      1 LAZ
      Top

      MD_Medium

      none found
      Top

      MD_Constraints

      Count Component Use Limitation
      1 Lidar Use Limitation These data depict the elevations at the time of the survey and are only accurate for that time. Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations. Any conclusions drawn from analysis of this information are not the responsibility of NOAA or any of its partners. These data are NOT to be used for navigational purposes.
      Top

      MD_ReferenceSystem

      Count Component Code Authority Title
      1 Ellipsoid Ellipsoid in Meters
      1 NAD83 urn:ogc:def:crs:EPSG::4269 North American Datum 1983
      Top

      MD_GridSpatialRepresentation

      none found
      Top

      MD_Georeferenceable or MI_Georeferenceable

      none found
      Top

      MD_Georectified or MI_Georectified

      none found
      Top

      MD_Dimension

      none found
      Top

      MD_CoverageDescription or MI_CoverageDescription

      none found
      Top

      MD_Band or MI_Band

      none found
      Top

      MI_RangeElementDescription

      none found
      Top

      MD_AggregateInformation

      none found
      Top

      LE_Source or LI_Source

      none found
      Top

      LE_ProcessStep or LI_ProcessStep

      Count Component DateTime Description
      1 Point Generation. The points are generated as Terrascan binary Format using Terrapoint?s proprietary Laser Postprocessor Software. This software combines the Raw Laser file and GPS/IMU information to generate a point cloud for each individual flight. All the point cloud files encompassing the project area were then divided into quarter quad tiles. The referencing system of these tiles is based upon the project boundary minimum and maximums. This process is carried out in Terrascan. The bald earth is subsequently extracted from the raw LiDAR points using Terrascan in a Microstation environment. The automated vegetation removal process takes place by building an iterative surface model. This surface model is generated using three main parameters: Building size, Iteration angle and Iteration distance. The initial model is based upon low points selected by a roaming window and are assumed to be ground points. The size of this roaming window is determined by the building size parameter. These low points are triangulated and the remaining points are evaluated and subsequently added to the model if they meet the Iteration angle and distance constraints (fig. 1). This process is repeated until no additional points are added within an iteration. There is also a maximum terrain angle constraint that determines the maximum terrain angle allowed within the model. Multiple process dates.
      1 Processing. 1. Flight lines and data were reviewed to ensure complete coverage of the study area and positional accuracy of the laser points. 2. Laser point return coordinates were computed using the REALM survey suite and PosPac based on independent data from the LiDAR system, IMU, and aircraft. 3. The raw LiDAR file was assembled into flight lines per return with each point having an associated x, y, and z coordinate. 4. Visual inspection of swath to swath laser point consistencies within the study area were used to perform manual refinements of system alignment. 5. Custom algorithms were designed to evaluate points between adjacent flight lines. Automated system alignment was computed based upon randomly selected swath to swath accuracy measurements that consider elevation, slope, and intensities. Specifically, refinement in the combination of system pitch, roll and yaw offset parameters optimize internal consistency. 6. Noise (e.g., pits and birds) was filtered using REALM software tools based on known elevation ranges and included the removal of any cycle slips. 7. Using TerraScan and Microstation, ground classifications utilized custom settings appropriate to the study area. 8. The corrected and filtered return points were compared to the RTK ground survey points collected to verify the vertical and horizontal accuracies. 9. Points were broken into processing bins and output areas and output as laser points, TINed and GRIDed surfaces. Bare earth DEMs meet PSLC specifications.
      1 2013-10-01T00:00:00 The NOAA Coastal Services Center (CSC) downloaded topographic files in .txt format from PSLC's website. The files contained lidar elevation, intensity, return number, class, scan angle and GPS time measurements. The data were received in Washington State Plane South Zone 4602, NAD83 coordinates and were vertically referenced to NAVD88 using the Geoid03 model. The vertical units of the data were feet. CSC performed the following processing for data storage and Digital Coast provisioning purposes: 1. The All-Return ASCII txt files were parsed to convert GPS Week Time to Adjusted Standard GPS Time. 2. The All-Return ASCII files were converted from txt format to las format using LASTools' txt2las tool and reclassified to fit the CSC class list, 1 (unclassified), 2 (ground). 3. The las files were converted from orthometric (NAVD88) heights to ellipsoidal heights using Geoid03. 4. The las files' vertical units were converted from feet to meters. 5. The las files were converted from a Projected Coordinate System (WA SP South) to a Geographic Coordinate system (NAD83) 6. The las files' horizontal units were converted from feet to decimal degrees 7. The data were converted to LAZ format.
      1 2013-11-19T00:00:00 The NOAA National Geophysical Data Center (NGDC) received lidar data files via ftp transfer from the NOAA Coastal Services Center. The data are currently being served via NOAA CSC Digital Coast at http://www.csc.noaa.gov/digitalcoast/. The data can be used to re-populate the system. The data are archived in LAS or LAZ format. The LAS format is an industry standard for LiDAR data developed by the American Society of Photogrammetry and Remote Sensing (ASPRS); LAZ is a loseless compressed version of LAS developed by Martin Isenburg (http://www.laszip.org/). The data are exclusively in geographic coordinates (either NAD83 or ITRF94). The data are referenced vertically to the ellipsoid (either GRS80 or ITRF94), allowing for the ability to apply the most up to date geoid model when transforming to orthometric heights.
      Top

      MI_Operation

      none found
      Top

      MI_Platform

      none found
      Top

      MI_Instrument

      Count Component Code Type Description
      1 Terrapoint ALTMS Light Detection and Ranging
      Top