2009 Puget Sound LiDAR Consortium (PSLC) Topographic LiDAR: San Juan County and Lummi Island, WashingtonView Metadata As: Get Data, FAQ, HTML, 19139 XML
Assess Metadata For: Completeness, DOI Readiness, CSW Readiness, Components
2009 Puget Sound LiDAR Consortium (PSLC) Topographic LiDAR: San Juan County and Lummi Island, Washington
browse graphicThe dataset encompasses portions of San Juan and Whatcom counties in northwest Washington. The surveyed area is approximately 222 square miles. The LAS V1.1 files are classified into Class 1 (Unclassified) and Class 2 (Bare Earth) water points are included in both classes. The LAS files are all-return and also include intensity measurements. 50% overlap was used between flightines, resulting in each area being surveyed twice. The nominal point spacing of the data is 0.408 meters (6 pt/sq. meter). Watershed Sciences, Inc. collected the LiDAR and created this data set for the Puget Sound LiDAR Consortium

Get the Data
AccessFormat(s)Distributor(s) / Contact InfoInstructions / Constraints
LAZ
Format version: (version is unknown)
DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
843-740-1200Mike Sutherland
DOC/NOAA/NESDIS/NGDC > National Geophysical Data Center, NESDIS, NOAA, U.S. Department of Commerce
303-497-6120
7:30am-5:00pm Mountain
Ordering Instructions
The National Geophysical Data Center serves as the archive for this LIDAR data. NGDC should only be contacted for this data if it cannot be obtained from NOAA Coastal Services Center.

The National Geophysical Data Center serves as the archive for this LIDAR dataset. NGDC should only be contacted for the data if it cannot be obtained from NOAA Coastal Services Center.

Use Limitation
These data depict the elevations at the time of the survey and are only accurate for that time. Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations. Any conclusions drawn from analysis of this information are not the responsibility of NOAA or any of its partners. These data are NOT to be used for navigational purposes.

Legal Constraints