National Geophysical Data Center (NGDC), NOAA Satellite and Information Service

Alternate Views: Get Data, FAQ, ISO Rubric, DOI Rubric, CSW, HTML, Components, XML

2013 Puget Sound LiDAR Consortium (PSLC) Topographic LiDAR: Entiat

browse graphicThis kmz file shows the extent of coverage for the 2013 PSLC Entiat lidar data set.
In October 2012, WSI (Watershed Sciences, Inc.) was contracted by the Puget Sound LiDARConsortium (PSLC) to collect Light Detection and Ranging (LiDAR) data for the EntiatRiver site in central Washington. The area is adjacent to several other LiDAR projectscollected in the greater Wenatchee area since 2008. Data were collected to aid inassessing the topographic and geophysical properties of the study area to supportfault line and geologic instability within the area. The Entiat site covers 67,067 acres,collected June 23, 26, 28, 29 and 30, 2013.

Cite this dataset when used as a source.

Search and Download
    Distribution Formats
    • LAZ
    Distributor DOC/NOAA/NOS/CSC > Coastal Services Center, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
    Point of Contact Diana Martinez
    Puget Sound Lidar Consortium (PSLC)
    206-971-3052
    dmartinez@psrc.org
    Associated Resources
    • Lidar Dataset Supplemental Information
    Originator
    • DOC/NOAA/NOS/CSC > Coastal Services Center, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
    Originator
    • Diana Martinez
      Puget Sound Lidar Consortium (PSLC)
    Publisher
    • DOC/NOAA/NOS/CSC > Coastal Services Center, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
    Date(s)
    • publication: 2014-01-10
    Data Presentation Form: Digital image
    Dataset Progress Status Complete
    Data Update Frequency: As needed
    Purpose: Provide high resolution terrain elevation and land cover elevation data.
    Use Limitations
    • These data depict the elevations at the time of the survey and are only accurate for that time. Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations. Any conclusions drawn from analysis of this information are not the responsibility of NOAA or any of its partners. These data are NOT to be used for navigational purposes.
    Time Period: Unknown  to  Unknown
    Spatial Reference System: urn:ogc:def:crs:EPSG::4269 Ellipsoid in Meters
    Spatial Bounding Box Coordinates:
    N: 47.74748427
    S: 47.52317975
    E: -120.2568846
    W: -120.5446775
    Spatial Coverage Map:
    Themes
    • Topography
    • Elevation
    • Model
    • LiDAR
    • LAZ
    • LAS
    • Remote Sensing
    Places
    • US
    • Washington
    • Chelan County
    • Entiat
    Use Constraints No constraint information available
    Fees Fee information not available.
    Lineage Statement Lineage statement not available.
    Processor
    • DOC/NOAA/NOS/CSC > Coastal Services Center, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
    • DOC/NOAA/NESDIS/NGDC > National Geophysical Data Center, NESDIS, NOAA, U.S. Department of Commerce
    Processing Steps
    • Planning.In preparation for data collection, WSI reviewed the project area using Google Earth,and flightlines were developed using a combination of specialized software. Carefulplanning by acquisition staff entailed adapting the pulse rate, flight altitude, scanangle, and ground speed to ensure complete coverage of the study area at thetarget point density of =8 pulses per square meter (0.74 pulses/square foot).Efforts are taken to optimize flight paths by minimizing flight times whilemeeting all accuracy specifications.Factors such as satellite constellation availability and weather windows mustbe considered during the planning stage. Any weather hazards or conditions affectingthe flight were continuously monitored due to their potential impact on the dailysuccess of airborne and ground operations. In addition, a variety of logisticalconsiderations required review including private property access, potential airspace restrictions, and availability of company resources (both staff andequipment).
    • LiDAR Processing Steps:1. Resolve kinematic corrections for aircraft position data using kinematic aircraft GPSand static ground GPS data.Software - Waypoint GPS v.8.3 Trimble Business Center v.3.00 Geographic Calculator 20132. Develop a smoothed best estimate of trajectory (SBET) file that blends post-processedaircraft position with attitude data. Sensor head position and attitude are calculatedthroughout the survey. The SBET data are used extensively for laser point processing.Software - IPAS TC v.3.13. Calculate laser point position by associating SBET position to each laser point returntime, scan angle, intensity, etc. Create raw laser point cloud data for the entire surveyin *.las (ASPRS v. 1.2) format. Data are converted to orthometric elevations (NAVD88) byapplying a Geoid12 correction.Software - ALS Post Processing Software v.2.744. Import raw laser points into manageable blocks (less than 500 MB) to perform manualrelative accuracy calibration and filter erroneous points. Ground points are thenclassified for individual flight lines (to be used for relative accuracy testingand calibration).Software - TerraScan v.13.0085. Using ground classified points per each flight line, the relative accuracy is tested.Automated line-to-line calibrations are then performed for system attitude parameters(pitch, roll, heading), mirror flex (scale) and GPS/IMU drift.Calibrations are calculated on ground classified points from paired flight lines andresults are applied to all points in a flight line. Every flight line is used forrelative accuracy calibration.Software - TerraMatch v.13.0026. Classify resulting data to ground and other client designated ASPRSclassifications (Table 7). Assess statistical absolute accuracy via direct comparisonsof ground classified points to ground RTK survey data.Software - TerraScan v.13.008 TerraModeler v.13.0027. Generate bare earth models as triangulated surfaces. Highest hit models were createdas a surface expression of all classified points (excluding the noise and withheldclasses). All surface models were exported as ESRI grids at a 3-foot pixel resolution.Software - TerraScan v.13.008 ArcMap v. 10.1 TerraModeler v.13.002
    • The NOAA Coastal Services Center (CSC) downloaded topographic files in LAZ format from PSLC's website.The files contained lidar easting, northing, elevation, intensity, return number, class, scan angleand GPS time measurements. Entiat data were received in Washington State Plane North, 4601 (feet) andreferenced to NAVD88 vertical feet.CSC performed the following processing for data storage and Digital Coast provisioning purposes:1. The All-Return LAZ files were cleared of variable lengths records.2. The All-Return LAZ files were converted from a Projected Coordinate System (State Plane 4601)to a Geographic Coordinate system (NAD83).3. The All-Return LAZ files were converted from NAVD88 to ellipsoidal heights using Geoid03.
    • The NOAA National Geophysical Data Center (NGDC) received lidar data files via ftp transfer from the NOAA Coastal Services Center. The data are currently being served via NOAA CSC Digital Coast at http://www.csc.noaa.gov/digitalcoast/. The data can be used to re-populate the system. The data are archived in LAS or LAZ format. The LAS format is an industry standard for LiDAR data developed by the American Society of Photogrammetry and Remote Sensing (ASPRS); LAZ is a loseless compressed version of LAS developed by Martin Isenburg (http://www.laszip.org/). The data are exclusively in geographic coordinates (either NAD83 or ITRF94). The data are referenced vertically to the ellipsoid (either GRS80 or ITRF94), allowing for the ability to apply the most up to date geoid model when transforming to orthometric heights.

    Metadata Last Modified: 2014-02-05

    For questions about the information on this page, please email: mike.sutherland@noaa.gov