gov.noaa.csc.maps:swfwmd2005_manatee Southwest Florida Water Management District (SWFWMD) 2006 Charleston, SC NOAA's Ocean Service, Coastal Services Center (CSC) http://www.csc.noaa.gov/ldart The Light Detection and Ranging (LiDAR) LAS dataset is a survey of select areas within Southwest Florida. These data were produced for the Southwest Florida Water Management District (SWFWMD). The Manatee / Little Manatee LiDAR Survey project area consists of approximately 176 square miles. This data set falls in Manatee County. The LiDAR point cloud was flown at a density sufficient to support a maximum final post spacing of 6 feet for unobscured areas. 3001 inc. acquired 445 flightlines between February 11, 2005 and April 14, 2005. The data was divided into 5000' by 5000' foot cells that serve as the tiling scheme. The Manatee / Little Manatee LiDAR Survey was collected under the guidance of a Professional Mapper/Surveyor. The Southwest Florida Water Management District uses topographic information to support regulatory, land management and acquisition, planning, engineering, and habitat restoration projects. The Manatee / Little Manatee LiDAR Survey data will support the creation of Federal Emergency Management Agency Flood Insurance Rate Maps (FEMA FIRM) and an integrated ground and surface water model for the Peace River Watershed. All data will be public record as defined by applicable Florida statutes. The Manatee / Little Manatee LiDAR Survey was collected under the guidance of a licensed and professional Surveyor and Mapper. 3001 inc. also acquired 97 flightlines between April 3, 2005 and April 11, 2005 for the Little Manatee District data set. The information in this report is the result of the LiDAR surveys performed on the dates indicated and the general conditions at the time. The Little Manatee and Manatee Ground Control Survey Report may be viewed at: ftp://ftp.csc.noaa.gov/pub/crs/beachmap/qa_docs/fl/swfwmd 20050211 20050414 Publication date Complete None planned -82.574841 -82.219672 27.634545 27.510505 ISO 19115 Topic Category Elevation None Bathymetry/Topography Contour DEM DSM DTM Elevation Height Photogrammetry Planimetric TIN Stereo Photogrammetry ESRI Shapefile Hydrography LAS v.1.0 None US Florida Southwest Florida Tampa Manatee County Buffalo Canal Frog & Gamble Creek None Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations. Southwest Florida Water Management District (SWFWMD) Mailing and physical address

2379 Broad Street

Brooksville FL 34604 USA 352-796-7211 (985) 649 - 5082 Southwest Florida Water Management District ArcInfo 9.0 Stream shore lines and 2-D coordinate line strings were collected as breaklines using LiDAR that was acquired and processes to FEMA specifications. These breaklines were created from on-screen digitizing using a combination of the LiDAR points and the orthophotography. Attributes were verified using routines that verify the vertical and horizontal positions of the breaklines. The LAS files were flown at a density sufficient to support a maximum final post spacing of 6 feet for unobscured areas. 3001 inc. also acquired 97 flightlines between April 3, 2005 and April 11, 2005 for the Little Manatee District data set. The data was divided into 5000' by 5000' foot cells that serve as the tiling scheme. The Manatee / Little Manatee LiDAR Survey was collected under the guidance of a Professional Mapper/Surveyor. The LAS files were flown at a density sufficient to support a maximum final post spacing of 6 feet for unobscured areas. The bare-earth surface will contain voids in areas that were densely vegetated, covered by bridges, buildings, water, fresh asphalt, sand etc. All ground control processing and adjustment is performed using published coordinate horizontal and vertical datums (e.g. NGS CORS). For deliverables, Corpscon for Windows Version 5.11.08 (geoid 99) was used for horizontal and vertical datum conversion as well as for coordinate system conversion purposes (e.g. UTM to State plane). Compiled to meet 1.0 meter horizontal accuracy at the 95% confidence level. The accuracy assessment was performed using a standard method to compute the root mean square error (RMSE) based on a comparison of ground control points (GCP) and filtered LiDAR data points. Filtered LiDAR data has had vegetation and cultural features removed and by analysis represents bare earth elevations. Testing was performed prior to gridding of the filtered LiDAR data points and construction of the Intergraph .dtm file format. The RMSE figure was used to compute the vertical National Standard for Spatial Data Accuracy (NSSDA). Ground control was established by 3001, Inc. A spatial proximity analysis was used to select edited LiDAR data points contiguous to the relevant GCPs. A search radius decision rule is applied with consideration of terrain complexity, cumulative error and adequate sample size. Cumulative error results from the errors inherent in the various sources of horizontal measurement. These sources include the airborne GPS, GCPs and the uncertainty of the accuracy of the LiDAR data points. This accuracy is achieved prior to the subsampling that occurs through integration with the inertial measurement unit (IMU) positions that are recorded. It is unclear at this time whether the initial accuracy is maintained. The horizontal accuracy of the GCPs is estimated to be in the range of approximately 1 to 1.6 inches. Finally, sample size was considered. The specification for the National Standard for Spatial Data Accuracy is a minimum of 20 points to conduct a statistically significant accuracy evaluation (Minnesota Planning, 1999, Positional Accuracy Handbook, Minnesota Planning Land Management Information Center, St. Paul, Minnesota., p.3). Most statistical texts indicate that a minimum of 30 sample points provide a reasonable Approximation of a normal distribution. The intent of the NSSDA is to reflect the geographic area of interest and the distribution of error in the data set (Federal Geographic Data Committee, 1998, Geospatial National Standard Southwest Florida Water Management District Unknown Unknown Remote-sensing image 24000 Digital tape media 2005 Unknown Publication date Unknown The Manatee / Little Manatee LiDAR Survey was acquired for the Southwest Florida Water Management District and processed by 3001, Inc. The ABGPS, inertial measurement unit (IMU), and raw scans are collected during the LiDAR aerial survey. The ABGPS monitors the xyz position of the sensor and the IMU monitors the orientation. During the aerial survey laser pulses reflected from features on the ground surface are detected by the receiver optics and collected by the data logger. GPS locations are based on data collected by receivers on the aircraft and base stations on the ground. The ground base stations are placed no more than 35 km radius from the flight survey area. Leica ALS50 Airborne Global Positioning System Inertial Measuring Unit Global Positioning System 2005 LiDAR Scan Files LiDAR Scans, GPS data 3001 Inc. LiDAR Department Mailing and physical address

501 Robert Blvd.

Slidell LA 70458 USA (985) 661 - 3001 (985) 649 - 5082 klewis@3001inc.com 8:00 - 5:00 The ABGPS, IMU, and raw scans are integrated using proprietary software developed by the Leica Geosystems and delivered with the Leica ALS50 System. The resultant file is in a LAS binary file format. The LAS file version 1.0 format can be easily transferred from one file format to another. It is a binary file format that maintains information specific to the LiDAR data (return#, intensity value, xyz, etc.). The resultant points are produced in the State Plane Florida West coordinate system, with units in feet and referenced to the NAD83 horizontal datum and NAVD88 vertical datum. Airborne Global Positioning System Data Inertial Measurement Unit LiDAR Scans 2005 Southwest Florida LiDAR Point Cloud data sets LAS 1.0 file format 3001 Inc. LiDAR Manager Mailing and physical address

501 Robert Blvd

2nd Floor

Slidell Louisiana 70458 USA (703) 574 - 2175 8:00 - 5:00 The unedited data are classified to facilitate the application of the appropriate feature extraction filters. A combination of proprietary filters is applied as appropriate for the production of bare earth digital terrain models (DTMs). Interactive editing methods are applied to those areas where it is inappropriate or impossible to use the feature extraction filters, based upon the design criteria and/or limitations of the relevant filters. These same feature extraction filters are used to produce elevation height surfaces. Point Cloud LiDAR LAS 1.0 format 2005 Filtered Data LiDAR datasets 3001 Inc. LiDAR Manager Mailing and physical address

501 Robert Blvd

2nd Floor

Slidell Louisiana 70458 USA (703) 574 - 2175 8:00 - 5:00 Filtered and edited data are subjected to rigorous QA/QC according to the 3001 Inc. Quality Control Plan and procedures. Very briefly, a series of quantitative and visual procedures are employed to validate the accuracy and consistency of the filtered and edited data. Ground control is established by 3001, Inc. and GPS-derived ground control points (GCPs) points in various areas of dominant and prescribed land cover. These points are coded according to land cover, surface material and ground control suitability. A suitable number of points are selected for calculation of a statistically significant accuracy assessment as per the requirements of the National Standard for Spatial Data Accuracy. A spatial proximity analysis is used to select edited lidar data points within a specified distance of the relevant GCPs. A search radius decision rule is applied with consideration of terrain complexity, cumulative error and adequate sample size. Accuracy validation and evaluation is accomplished using proprietary software to apply relevant statistical routines for calculation of Root Mean Square Error (RMSE) and the National Standard for Spatial Data Accuracy (NSSDA) according to Federal Geographic Data Committee (FGDC) specifications. Filtered LiDAR data LAS 1.0 format 2005 Quality verified bare-earth data set LAS 1.0 file format 3-D hydrologic breaklines Classified LiDAR dataset 3001 Inc. LiDAR Department Mailing and physical address

501 Robert Blvd.

Slidell LA 70458 USA (985) 661 - 3001 (985) 649 - 5082 klewis@3001inc.com 8:00 - 5:00 The LiDAR mass points were delivered in American Society for Photogrammetry and Remote Sensing LAS 1.0 format. The header file for each dataset is complete as define by the LAS 1.0 specification. In addition the following fields are included: Flight Date Julian, Year, and Class. The LAS files do not include overlap. The data was classified as follows: Class 1 = Unclassified. This class includes vegetation, buildings, noise etc. Class 2 = Ground Class 3 = Water The datasets were delivered in the Districts standard 5000' by 5000' tiling scheme. The tiles are contiguous and do not overlap. The tiles are suitable for seamless topographic data mosaics that include no "no data" areas. The names of the tiles are left padded with zeros as required to achieve a five character length and all files utilize the LAS file extension. Filtered LiDAR dataset Bare-Erath LiDAR dataset 2005 3-D hydrologic breaklines 3001 Inc. LiDAR Department Mailing and physical address

501 Robert Blvd

Slidell LA 70458 USA (985) 661 - 3001 (985) 649 - 5082 klewis@3001inc.com 8:00 - 5:00 Dataset copied. M:\Data3\05_Final_Products\SWFWMD_South_District\00_Reports\Metadata\metadata\ 2005_Hydro_metadata_3001inc Unknown The NOAA Coastal Services Center (CSC) received the files in LAS format. The files contained Lidar elevation measurements. The data was in Florida State Plane Projection and NAVD88 vertical datum. CSC performed the following processing to the data to make it available within the LDART Retrieval Tool (LDART): 1. The data were converted from Florida State Plane West coordinates to geographic coordinates. 2. The data were converted from NAVD88 (orthometric) heights to GRS80 (ellipsoid) heights using Geoid 99. 3. The LAS data were sorted by latitude and the headers were updated. 20080125 Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), Coastal Services Center (CSC) Coastal Elevation Mapping (CEM) Project Scientist Mailing and physical address

2234 South Hobson Ave.

Charleston SC 29405-2413 843-740-1200 tcm@csc.noaa.gov 0 Point Point 0.000000001 0.000000001 Decimal degrees North American Datum of 1983 Geodetic Reference System 80 6378137.000000 298.257222 Ellipsoid 0.001 Meters Explicit elevation coordinate included with horizontal coordinates Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), Coastal Services Center (CSC) CEM Project Scientist Mailing and physical address

2234 South Hobson Ave.

Charleston SC 29405-2413 843-740-1200 tcm@csc.noaa.gov Downloadable Data Any conclusions drawn for the analysis of this information are not the responsibility of the Coastal Services Center or its partners. This data can be obtained on-line at the following URL: http://www.csc.noaa.gov/ldart DOC/NOAA/NESDIS/NGDC > National Geophysical Data Center, NESDIS, NOAA, U.S. Department of Commerce Kelly Stroker Mailing and Physical Address

NOAA/NESDIS/NGDC E/GC1 325 Broadway

Boulder CO 80305-3328 USA (303) 497-4603 (303) 497-6958 (303) 497-6513 kelly.stroker@noaa.gov 7:30-5:00 Mountain Contact Data Center Disclaimer While every effort has been made to ensure that these data are accurate and reliable within the limits of the current state of the art, NOAA cannot assume liability for any damages caused by any errors or omissions in the data, nor as a result of the failure of the data to function on a particular system. NOAA makes no warranty, expressed or implied, nor does the fact of distribution constitute such a warranty. The National Geophysical Data Center serves as the archive for this LIDAR data. NGDC should only be contacted for this data if it cannot be obtained from NOAA Coastal Services Center. 20060713 20080227 Department of Commerce (DOC), National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), Coastal Services Center (CSC) CEM Project Scientist Mailing and physical address

2234 South Hobson Ave.

Charleston SC 29405-2413 843-740-1200 tcm@csc.noaa.gov FGDC Content Standards for Digital Geospatial Metadata FGDC-STD-001-1998