Leg	Site	Hole	Core	Type	Section	Top_Interval (cm)		Depth (mbsf)	Strength	Run_Date_Time	Rotation__Direction	Range	Comment
134	827	A	6	H	1	42	45.32	35.9			0	I THINK THIS IS WRONG, ADDED 0 TO TORQUE VALUE TO GET REAL
134	827	A	6	H	3	45	48.35	110.9			0	I THOUGT THIS WAS WRONG, ADDED 0 TO TORQUE VALUE TO GET REAL
134	827	A	6	H	4	117	50.57	94.1			0	WAS TD ON WRONG SCALE? HAD TO ADD 0 TO GET A BELIEVABLE READING
134	827	A	6	H	5	43	51.33	112			0	I KNOW THIS IS WRONG, SO I ADDED A ZERO TO THE TORQUE-SCALE WAS OFF?
134	827	A	7	H	1	32	53.12	62.7			0	HAD TO ADD A ZERO FOR BELIEVABLE READING
134	827	A	7	H	3	43	56.23	66.1			0	HAD TO ADD A ZERO TO TORQUE AGAIN
134	827	A	7	H	5	44	59.24	117.6			0	HAD TO ADD A ZERO TO GET A REAL NUMBER
134	827	A	8	H	1	43	61.43	98.6			0	HAD TO ADD A ZERO TO TORQUE
134	827	A	8	H	3	33	64.33	107.6			0	HAD TO ADD A 0 TO GET REAL
134	827	A	14	X	1	18	91.68	33.6			0	
134	827	A	14	X	CC	30	92.93	79.5			0	MAY BE INCORRECT, SEEMS A LITTLE LOW
134	827	A	15	X	1	56	101.56	53.8			0	RESIDUAL STRENGTH
134	827	A	15	X	3	78	104.78	82.9			0	RESIDUAL STRENGTH
134	828	A	9	H	1	32	71.22	63.9			0	
134	828	A	9	H	3	21	74.11	51.5			0	
134	828	A	9	H	3	24	74.14	44.8			0	
134	828	A	9	H	4	100	76.4	99.7			0	
134	828	A	9	H	5	13	77.03	71.7			0	
134	828	A	10	H	1	35	80.75	48.2			0	
134	828	A	10	H	3	42	83.82	116.5			0	
134	828	A	10	H	5	34	86.74	142.3			0	
134	828	A	10	H	7	36	89.76	39.2			0