NCEI (formerly NGDC)
EMMA logo
Back to Collection NOAA/NESDIS/NGDC/MGG/Lidar
View Metadata As: Get Data, FAQ, HTML, 19139 XML
Assess Metadata For: Completeness, DOI Readiness, CSW Readiness, Components

2004 Federal Emergency Management Agency (FEMA) Bare Earth Topographic LiDAR: Connecticut River

browse graphicThis kmz file shows the extent of coverage for the 2004 FEMA Connecticut River lidar data set..
LiDAR data is remotely sensed high-resolution elevation data collected by an airborne collection platform. The LiDAR files were converted from .PTS format to LAS V1.2. All data is Bare Earth, with 99% of all buildings removed and 95% of all vegetation removed. There is no information available for return number, scan angle, GPS time, or intensity. This data set covers approximately 1,233.83 square miles (3,195.6 sq km) of the Connecticut River.
Cite this dataset when used as a source.
Other Access Online access information not available.
Distribution Formats
  • LAZ
Distributor DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
843-740-1200
coastal.info@noaa.gov
Dataset Point of Contact Flood Insurance and Mitigation Division
Federal Emergency Management Agency, Region I
Documentation links not available.
Date(s)
  • publication: 2013-04-01
Data Presentation Form: Digital image
Dataset Progress Status Complete
Data Update Frequency: As needed
Purpose: The purpose of this LiDAR data was to produce high accuracy 3D elevation based geospatial products for coastal flood mapping.
Use Limitations
  • These data depict the elevations at the time of the survey and are only accurate for that time. Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations. Any conclusions drawn from analysis of this information are not the responsibility of NOAA or any of its partners. These data are NOT to be used for navigational purposes.
  • While every effort has been made to ensure that these data are accurate and reliable within the limits of the current state of the art, NOAA cannot assume liability for any damages caused by any errors or omissions in the data, nor as a result of the failure of the data to function on a particular system. NOAA makes no warranty, expressed or implied, nor does the fact of distribution constitute such a warranty.
Originator(s)
  • DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
  • DHS/FEMA > Federal Emergency Management Agency, U.S. Department of Homeland Security
Publisher(s)
  • DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
Time Period: 2004-05-12 to 2004-06-16
Spatial Reference System: urn:ogc:def:crs:EPSG::4269
Spatial Bounding Box Coordinates:
N: 42.031316
S: 41.256891
E: -72.247097
W: -72.693735
Spatial Coverage Map:
Theme keywords None
  • Topography/Bathymetry
  • elevation
  • LAS
  • LiDAR
Place keywords None
  • New London County
  • Middlesex County
  • Hartford County
  • Connecticut
  • United States
Use Constraints No constraint information available
Fees Fee information not available.
Lineage information for: dataset
Processor
  • DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
  • DOC/NOAA/NESDIS/NCEI > National Centers of Environmental Information, NESDIS, NOAA, U.S. Department of Commerce
Processing Steps
  • 2013-03-01T00:00:00 - The NOAA Coastal Services Center (CSC) received the topographic files in .PTS format. The files contained lidar elevation measurements. The data were received in Connecticut State Plane coordinates, NAD83 (Zone 0600) and were vertically referenced to NAVD88 using the Geoid99 model. The vertical units of the data were feet. CSC performed the following processing for data storage and Digital Coast provisioning purposes: 1. The .PTS files were converted to LAS V1.2 2. All points were set to Class 2 (Bare Earth) 3. The topographic las files were converted from a Projected Coordinate System (Connecticut State Plane) to a Geographic Coordinate system (NAD83). 4. The topographic las files' horizontal units were converted from US survey feet to decimal degrees. 5. The topographic las files were converted from orthometric (NAVD88) heights to ellipsoidal heights using Geoid99. 6. The topographic las files' vertical units were converted from survey feet to meters. 7. The data were converted to LAZ format.
  • 2013-05-15T00:00:00 - The NOAA National Geophysical Data Center (NGDC) received lidar data files via ftp transfer from the NOAA Coastal Services Center. The data are currently being served via NOAA CSC Digital Coast at http://www.csc.noaa.gov/digitalcoast/. The data can be used to re-populate the system. The data are archived in LAS or LAZ format. The LAS format is an industry standard for LiDAR data developed by the American Society of Photogrammetry and Remote Sensing (ASPRS); LAZ is a loseless compressed version of LAS developed by Martin Isenburg (http://www.laszip.org/). The data are exclusively in geographic coordinates (either NAD83 or ITRF94). The data are referenced vertically to the ellipsoid (either GRS80 or ITRF94), allowing for the ability to apply the most up to date geoid model when transforming to orthometric heights.
Last Modified: 2013-05-15
For questions about the information on this page, please email: mike.sutherland@noaa.gov