NCEI (formerly NGDC)
EMMA logo
Back to Collection NOAA/NESDIS/NGDC/MGG/Lidar
View Metadata As: Get Data, FAQ, HTML, 19139 XML
Assess Metadata For: Completeness, DOI Readiness, CSW Readiness, Components

2006 OSIP OGRIP: Upland Counties LiDAR Survey

browse graphicThis kmz file shows the extent of coverage for the 2006 OGRIP Upland Ohio lidar data set.
The 2006 OSIP digital LiDAR data was collected during the months of March and May (leaf-off conditions). The LiDAR covers the entire land area of the northern tier of Ohio (approximately 23,442 square miles. The LiDAR is delivered in county sets, consisting of 5,000' x 5,000' size tiles. Where the State borders other states (land only), the entire border of the State is buffered by at least 1,000-feet. Along the Lake Erie Shoreline ortho coverage is buffered beyond the shoreline a minimum distance of 2,500-feet. Adjacent flight lines overlap by an average of 30 percent. LiDAR was collected with Leica ALS50 digital LiDAR Systems. The file naming convention is as follows: Nxxxxyyy = 5,000' x 5,000' LiDAR Tiles located in the Ohio State Plane Coordinate System (North Zone). Sxxxxyyy = 5,000' x 5,000' LiDAR Tiles located in the Ohio State Plane Coordinate System (South Zone). Please note that xxxx and yyy represent the easting and northing coordinates (respectively) in state plane feet, The naming convention for each LiDAR tile is based upon (the bottom most-left pixel). The LiDAR was provided in LAS Format containing the above ground and bare-earth LiDAR features. Ownership of the data products resides with the State of Ohio. Orthophotography and ancillary data products produced through this contract are public domain data. LiDAR was acquired Statewide to provide a solid and very accurate base to use during the image rectification process. This same LiDAR can be supplemented with 3D breaklines to generate 2-foot and/or 4/5-foot contours. The average post spacing between LiDAR points is 7-feet. The flying altitude was 7,300-feet AMT, with the targeted flying speed at 170 knots.
Cite this dataset when used as a source.
Other Access Online access information not available.
Distribution Formats
  • LAZ
Distributor DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
Dataset Point of Contact Jeff Smith
Project Administrator
State of Ohio, through the Office of Information Technology, Investment and Governance Division, for the Office of Information Technology, Services Delivery Division and the Ohio Geographically Referenced Information Program (OGRIP)
Documentation links not available.
  • publication: 2013-08-20
Data Presentation Form: Digital image
Dataset Progress Status Complete
Data Update Frequency: Unknown
Purpose: The State of Ohio has a goal to develop and maintain a seamless statewide base map, referred to as OSIP (Ohio Statewide Imagery Program). OSIP is an initiative partnered through several State Agencies (i.e. ODOT, ODNR) through OGRIP. Data from this project forms the foundation of the Statewide base map, and was developed primarily to support multi-use applications, including homeland security, emergency management, economic development, and the business of government.
Use Limitations
  • These data depict the elevations at the time of the survey and are only accurate for that time. Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations. Any conclusions drawn from analysis of this information are not the responsibility of NOAA or any of its partners. These data are NOT to be used for navigational purposes.
  • While every effort has been made to ensure that these data are accurate and reliable within the limits of the current state of the art, NOAA cannot assume liability for any damages caused by any errors or omissions in the data, nor as a result of the failure of the data to function on a particular system. NOAA makes no warranty, expressed or implied, nor does the fact of distribution constitute such a warranty.
  • DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
  • State of Ohio Office of Information Technology (OSIP), Ohio Geographically Referenced Information Program (OGRIP)
  • DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
Time Period: 2006-03-18 to 2006-05-07
Spatial Reference System: urn:ogc:def:crs:EPSG::4269
Spatial Bounding Box Coordinates:
N: 41.730895
S: 41.176085
E: -80.497619
W: -84.826131
Spatial Coverage Map:
Theme keywords None
  • Bathymetry/Topography
  • LiDAR
  • imageryBaseMapsEarthCover
  • statewide imagery
  • Georectification
  • OSIP
  • Statewide LiDAR
Place keywords None
  • United States
  • Ohio
  • Geauga County
  • Summit County
  • Columbiana County
  • Portage County
  • Wayne County
  • Trumbull County
  • Mahoning County
  • Medina County
  • Stark County
  • Defiance County
  • Fulton County
  • Henry County
  • Hancock County
  • Huron County
  • Paulding County
  • Putnam County
  • Seneca County
  • Van Wert County
  • Williams County
  • Woods County
  • Allen County
  • Crawford County
  • Richland County
  • Ashland County
  • Wyandot County
  • Auglaize County
  • Hardin County
  • Marion County
  • Shelby County
  • Mercer County
Use Constraints No constraint information available
Fees Fee information not available.
Lineage information for: dataset
  • DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration, U.S. Department of Commerce
  • DOC/NOAA/NESDIS/NCEI > National Centers of Environmental Information, NESDIS, NOAA, U.S. Department of Commerce
Processing Steps
  • 2013-08-28T00:00:00 - Data was dowloaded from Standard OSIP imagery and elevation products were collected from 2006 - 2008. The CPA benefits the state by providing enhanced resolution products OSIP while saving participating counties an estimated 4.5 million in taxpayer dollars over the cost of obtaining these imagery, LiDAR and elevation products individually. The savings are due in large part to the economy of scale realized through a statewide program and the fact that the state is responsible for the cost of project administration. Any information regarding acquisition, dissemination or updates should be directed to the contact information within this metadata or found on the OSIP OGRIP website.
  • 2013-08-19T00:00:00 - The NOAA Coastal Services Center (CSC) receieved the data from: Downloaded in las format. The files contained LiDAR elevation and intensity measurements. The decision to use these 30 counties as "upland" in support of the "coastal" counties previously processed was set based on the Ohio River-Lake Erie divide at the watershed boundaries at the southern extent of this dataset. The data were in Ohio State Plane North (SP83 3401, feet) and NAVD88 vertical datum (in feet, assumed Geoid03). CSC performed the following processing for data storage and Digital Coast provisioning purposes: 1. The data were converted from Ohio State Plane North (3401, feet) coordinates to geographic coordinates. 2. The data were converted from NAVD88 (orthometric) heights to GRS80 (ellipsoid) heights using Geoid03. 3. The data were sorted by time and zipped to laz format. 4. The data were then cleaned of errant points, determinant of specific county high and low values, as follows, County, Points above elevation removed (meters), Points below elevation removed (meters): Geauga County,154,459; Summit County,601,1528 (feet); Columbiana County,165,700; Portage County,230,584; Wayne County,none,448; Trumbull County,203,399; Mahoning County,205,573; Medina County,198,448; Stark County,235,466; Defiance County,161,328; Fulton County,173,297; Allen County,188,417; Henry County,158,303; Hancock County,175,330; Huron County,142,363; Paulding County,148,285; Putnam County,174,302; Seneca County,148,310; Van Wert County,155,287; Williams County,171,350; Woods County,103,283; Crawford County,210,407; Richland County,247,505; Ashland County,241,488; Wyandot County,182,366; Auglaize County,206,380; Hardin County,222,390; Marion County,222,387; Shelby County,211,385; Mercer County,202,353; 5. The individually obtained counties from the Lake Erie coast were combined to form an eight county entity for NOAA's archiving and storage. 6. The data were converted to LAZ format.
  • 2013-10-17T00:00:00 - The NOAA National Geophysical Data Center (NGDC) received lidar data files via ftp transfer from the NOAA Coastal Services Center. The data are currently being served via NOAA CSC Digital Coast at The data can be used to re-populate the system. The data are archived in LAS or LAZ format. The LAS format is an industry standard for LiDAR data developed by the American Society of Photogrammetry and Remote Sensing (ASPRS); LAZ is a loseless compressed version of LAS developed by Martin Isenburg ( The data are exclusively in geographic coordinates (either NAD83 or ITRF94). The data are referenced vertically to the ellipsoid (either GRS80 or ITRF94), allowing for the ability to apply the most up to date geoid model when transforming to orthometric heights.
Last Modified: 2013-10-17
For questions about the information on this page, please email: